Fluorescent Lamp Fixture Tips

This is the time when you need to do the fluorescent lamp fixture. What can you say about it? The first thing you need to deal with is about the system. You must understand about the fact that fluorescent lighting is a popular and efficient lighting system used worldwide. The explanation below will tell you more about fluorescent lamp fixture.

Before talking further about fluorescent lamp fixture, the fluorescent lighting is most commonly found in commercial facilities, partly because traditional fluorescent lighting systems are more complex and physically larger than the simple incandescent lamp and socket. Besides, the fluorescent lighting tended to only be available in “colder” colors of light than the accepted “warm” color produced by incandescent lighting.

Basically, there are two types of fluorescent lamp fixture. The first is the traditional fixture and the second is the instant fixture. Which one do you like better? The instant one will let you do everything easier than using the complicated ones. The instant start fixtures work by causing the lamp to initially “strike” or light by applying an initial voltage to the lamp that is many times greater than the lamps normal operating voltage. There are still some things you need to deal with the fluorescent lamp fixture above.

The fluorescent lamp fixture above is greater than the lamps breakdown resistance and will essentially start the lamp with brute force. Further, the starting voltage is as high as 940 volts in some models and even if the gas is extremely resistant, it will usually conduct. Besides, the instant start fixtures create a potential between the fixture and lamp cathodes to generate ionization that will help to lower the starting resistance of the lamp.

Further, once current starts flowing through the lamps, the lamps illuminate at close to their full brightness. After a successful start, the instant-start ballast will immediately regulate the voltage and current down to the normal operating levels. This is the important thing to know in talking about fluorescent lamp fixture. The traditional instant start lamps could be identified by having either a single pin on each end of the lamp or by having recessed contacts.

Some people are often clueless about fluorescent lamp fixture and do not know about the important things and considerations they should have in dealing with such lighting system. The higher voltages in these fixtures bring the influence of the older instant-start design. It uses the magnetic ballasts to employ special lamp sockets that are designed to disconnect the fixtures power source when a lamp is removed.

What is the last thing you need to know in dealing with fluorescent lamp fixture? The high output lamps have a plastic or similar material surrounding recessed contacts on each end of the lamp itself. The only purpose is nothing but preventing the lamp from being used in the wrong types of fixtures and may provide some protection from moisture making electrical contact with the lamp contacts. After knowing the fluorescent lamp fixture above, you should be careful and be more knowledgeable of any types of lighting system before finally installing it at your home.